Precautions for the use and handling of busbar processing machines

With the development of China's manufacturing industry, the use of busbar processing machines is becoming increasingly widespread. Nowadays, busbar processing machines are mainly suitable for the manufacturing of high and low voltage switchgear and transformers. The busbar processing machine is a large-scale equipment that must pay attention to its usage precautions when in use, in order to ensure the normal operation of the work. Next, we will introduce the precautions to be taken when handling busbar processing machines.

Before starting the busbar processing machine for the first time, the oil tank should be filled with oil to avoid damaging the oil pump. It is also necessary to be familiar with the performance, structure, and operation methods of the machine. Do not wear loose clothing during operation to avoid danger. After connecting the power to the busbar processing machine, preheat it for a short period of time, which can make the busbar processing machine more proficient in the subsequent operation.

Due to the fact that the busbar processing machine can be operated by multiple people, a dedicated person must be responsible for directing production. Be sure to choose the clearance between the cutting blade and the die, as well as the bending radius, based on the thickness of the copper bar. When replacing the mold, be sure to stop the machine to avoid danger. When operating, be careful when holding the workpiece and waiting for the slider to descend. The sharpness of the blades and die edges should be regularly checked. If the edges become dull, they should be repaired or replaced in a timely manner.

If the ambient temperature is below 0 ℃, the machine should be turned on and idle for minutes before operation. Installation, debugging, or dismantling of molds must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. When the busbar processing machine is started, do not place your hands or part of your body between the upper and lower molds to avoid accidents. Keep the oil clean and the oil circuit unobstructed, and add lubricating oil to the moving parts of each unit every shift. Electrical and hydraulic components must ensure flexible operation and correct position. If any abnormal phenomenon is found, the vehicle should be stopped immediately for inspection. After the use of the busbar processing machine is completed and the switch is turned off, the power supply must be disconnected, which is very important and also the most easily overlooked. If the power is not cut off, once a problem occurs, the gains are not worth the losses.

The handling operation of the busbar processing machine may not only damage the machine, but is also very dangerous. Please be sure to entrust professional personnel. Use transportation equipment and steel wire ropes that can fully withstand the weight of the machine. When suspending the CNC busbar punching and shearing machine, please use a steel wire rope to suspend the machine body at the lower end of the machine, paying attention to balance while gently lifting. When using a forklift to transport the machine body, attention should be paid to balance. Do not hit the machine when lifting or lowering it.

So it is very necessary to read the manual, follow the instructions in the manual for operation, and pay attention to safety.